4K HDMI Ethernet Extender to 150 Feet, WolfPack
CLICK HERE for WolfPack 4K HDMI Ethernet Extender to 150 feet
WolfPack 4K HDMI Ethernet Extender This HDTV Supply's WolfPack™ 4K HDMI Ethernet Extender set sends an HDMI video & audio signal up to 150 feet in a 4K 30 HDMI format. The 4K HDMI Ethernet Extender set includes two units: 1 - HDMI Sender (TX) and 1- HDMI Receiver (RX) and 2-Universal Power Supplies. Each device is installed using 1 piece of a CAT6 cable, with the AV signals transmitted digitally over a single CAT6 cable without any signal loss. It allows you to relocate sources, such as a 4K Blu-ray player or satellite box to a remotely located 4K display With only one low cost CAT6 cable you can readily extend HDMI sources from a 4K laptop, 4K DVD player, PS4/5, 4K X boxes and any other kind of 4K source compliant with HDMI to 4K distant displays, 4K-TVs, 4K projectors and 4K monitors including 4K HDMI enabled TV sets or 4K LCD PC monitors up to 175 feet away. NOTE: This 4K 60 HDMI Ethernet Extender was designed to work in standalone applications only and cannot be used with HDMI Matrix Switchers or HDMI Switchers. WolfPack 4K HDMI Ethernet Extender Features: HDCP (content protection) compliant Transmits and Receives HDMI Signals EDID (for accurate displays) compliancy Each set includes one sender and one receiver. Use single UTP LAN cable (Cat6) to substitute HDMI cable to achieve long distance transmission, the UTP Cable follows the standard of IEEE-568B. Transmission distance extends up to 60 meters under 4k@30hz. Supports Deep Color up to 36 bits. Supports lossless compressed digital audio: Dolby TrueHD, DTS-HD Master Audio. Lossless transmission. Data transfer speed 10.2 Gbps. 2-DC 5V power supplies EDID Explained: The 4K HDMI Ethernet Extender has an EDID switch on the Sender. EDID provides for optimal source-to-screen performance. EDID will optimize the video card output for the capabilities of the end display. The EDID ghost unit enables the copying, emulating, cloning, and learning of EDID data from a display. Our 4K HDMI Ethernet Extender ensures proper operation, for the best performing HDMI audio and video signal between any source and display & resolves the loss of video, intermittent (flashing) video, snow, or color-space (purple or red) issues. Why not buy this WolfPack 4K HDMI Ethernet Extender today? WolfPack 4K HDMI Ethernet Extender Specification: HDMI resolution: 3D /4K@30hz/1080p/1080i/720p/576p/576i/480p/480i Support video color format: 24bit/deep color 30bit,36bit Support audio format: DTS-HD/DolbytrueHD/LPCM7.1/DTS/Dolby-AC3/DSD Max bandwidth: 2250MHz Max baud rate: 10.2Gbps Input/Output TMDS signal: .0.5~1.5Volts p-p(TTL) Input/Output DDC signal: 5Volts p-p (TTL) Input cable distance: ≤10m AWG26 HDMI standard cable Output cable distance: 1080P 8-bit 50M over single CAT6/7/24AWG/Solid Max working current: 5V/800MA Power consumption: 5watts(Maximum) Power adapter format Input: AC (50HZ, 60HZ) :100V-240V Operating Temperature range: -5 to +35℃(+23 to +95℉) Operating Humidity range:.5 to 90%RH (No Condensation) Storage Temperature: -20°C ~ 60°C / -4°F ~ 140°F Dimension (L x W x H): 81.5x43.5x23(mm) Weight: 0.55lbs Why not buy this WolfPack 4K HDMI Ethernet Extender today? Reasons To Buy an HDTV Supply WolfPack Product Why not buy this 4K HDMI Ethernet Extender today?
HDTV Supplys WolfPack 8-8 HDMI Matrix Switcher Over CAT5 routes HDMI high definition audio/video from any of eight HDMI sources to any of 8 displays over 2-CAT5/6 cables. Because it is a matrix switcher, it allows any input to be sent to any output; or the same input to be sent to all outputs, or any combination. This 8x8 HDMI matrix gives you over 17,000,000 input and output combinations. The 8 - HDMI wallplates are included in the price. It also includes a 8-remote controls.
Wolfpack 8-8 HDMI Matrix Switch Via Cat5 - 8-Wallplates/Remotes & IR
4-Port 4K HDMI 2.0 Extender/Splitter over CAT6 w/ Loopout
WolfPack Products - 4K 60 Hz
HDTV Supplys 4K WolfPack HDMI Extender with HDMI 2.0, HDCP 2.2 and HDBaseT 2.0. is an extender which can send an uncompressed HDMI video and audio
4K WolfPack HDMI 2.0 to CAT5 Extender w/HDCP 2.2 via HDBaseT 2.0 & USB
OREI HDBaseT 4K 60Hz HDMI Extender over Cat5e/6 Ethernet LAN cable - Up to 115 Ft - IR, CEC, RS-232, PoC : Electronics
gofanco 1080p 1x8 8 Port HDMI Extender Splitter Over CAT5e/CAT6/CAT7 Ethernet Cable – IR Extension, Up to 40m (130ft) at 1080p 60Hz, 1 in 8 Out, HDMI Loopout (HDMIExt8P) : Electronics
4K WolfPack HDMI HDBaseT Extender to 220 Feet with IR & POC With 1-Year Warranty
OREI HDBaseT 4K 60Hz HDMI Extender Over Cat5e / 6 Ethernet LAN Cable - Up to 400ft - IR, CEC, RS-232, POC
1x4 HDMI Splitter with POC to 150 Feet Over Cat6 with IR & EDID
✔ 𝐇𝐃𝐌𝐈 𝐄𝐗𝐓𝐄𝐍𝐃𝐄𝐑 𝐎𝐕𝐄𝐑 𝐂𝐀𝐓𝟓𝐄/𝟔 𝐂𝐀𝐁𝐋𝐄: Extend 1080P up to 230 feet (70 meters) or 4K@60Hz (4:2:0) up to 130 feet (40 meters) over Cat5e/6 UTP cable.
J-Tech Digital 4K HDBaseT HDMI Extender Over Cat5e/6 Ethernet up to 230ft (1080P) 130ft (4K), Supports HDCP 2.2/1.4, RS232, Bi-Directional IR and PoC
PLUG & PLAY - Support for HDMI 2.0, compatible with HDCP 2.2. CLARITY - Highest resolution supported: 4K x 2K at 60Hz. SPEED - Transmission over a
SABRENT 4K HDMI Extender Over CAT6 (60 Meters / 200 feet) (DA-4KEX)
Wolfpack Design Electronics
HDTV Supplys WolfPack 4K HDMI HDBaseT Extender is based upon the HDBaseT protocol and can transmit an uncompressed HDMI video, audio & IR signal via a
4K WolfPack HDMI HDBaseT Extender to 220 Feet with IR & POC With 1-Year Warranty
This HDMI Extender over CAT6 lets you transmit a 4K 30Hz HDMI audio video signal up to 130ft (40m) or 230ft (70m) for 1080p resolutions. This converter kit includes both the transmitter and receiver for a complete end-to-end solution. This HDMI extender supports 7.1ch audio and resolutions of up to 4K at 30Hz (3840 x 2160) over a single CAT6/5e cable. The UHD HDMI Extender supports HDMI 1.4 and 4:4:4 chroma subsampling which ensures a crystal-clear picture.
StarTech.com 4K HDMI Extender Over Cat6/Cat5 Ethernet Cable
