Stepper motor - NEMA-17 size - 200 steps/rev, 12V 350mA : ID 324 : $14.00 : Adafruit Industries, Unique & fun DIY electronics and kits

Adafruit Industries, Unique & fun DIY electronics and kits Stepper motor - NEMA-17 size - 200 steps/rev, 12V 350mA : ID 324 - A stepper motor to satisfy all your robotics needs! This 4-wire bipolar stepper has 1.8° per step for smooth motion and a nice holding torque. The motor was specified to have a max current of 350mA so that it could be driven easily with an Adafruit motor shield for Arduino
A stepper motor to satisfy all your robotics needs! This 4-wire bipolar stepper has 1.8° per step for smooth motion and a nice holding torque. The motor was specified to have a max current of 350mA so that it could be driven easily with an Adafruit motor shield for Arduino (or other motor driver) and a wall adapter or lead-acid battery.Some nice details include a ready-to-go cable and a machined drive shaft (so you can easily attach stuff). We drove it with an Adafruit motor shield for Arduino and it hummed along nicely at 50 RPM. To connect to our shield, put the wires in this order: Red, Yellow, skip ground, Green, Brown (or Gray)

STEPPERONLINE Short Body Nema 17 Bipolar Stepper Motor 1A 22.6oz.in/16Ncm DIY CNC Extruder : Electronics

12V, 350mA, 28oz-in NEMA-17 Bipolar Stepper Motor : Electronics

Stepper motor - NEMA-17 size - 200 steps/rev, 12V 350mA : ID 324 : $14.00 : Adafruit Industries, Unique & fun DIY electronics and kits

STEPPERONLINE Nema 17 Stepper Motor 26Ncm(36.8oz.in) 12V 0.4A 3D Printer CNC : Industrial & Scientific

Stepper motor - NEMA17 - 12V 350mA

Simple multi-tasking - Project Guidance - Arduino Forum

Smooth motion and a nice holding torque 200 steps per revolution, 1.8 degrees Bipolar stepper, requires 2 full H-bridges! 12V rated voltage (you can drive it at a lower voltage, but the torque will drop) at 350mA max current A stepper motor to satisfy all your robotics needs! This 4-wire bipolar stepper has 1.8° per step for smooth motion and a nice holding torque.

Adafruit PID 324 Stepper Motor NEMA-17 Size 200 Steps Rev 12V 350mA

Stepper motor - NEMA-17 size - 200 steps/rev, 12V 350mA : ID 324 : $14.00 : Adafruit Industries, Unique & fun DIY electronics and kits

12V, 350mA, 28oz-in NEMA-17 Bipolar Stepper Motor - RobotShop

This bipolar Nema 17 stepper motor is one of the most popular model, it with step angle 1.8deg and size 42x42x34mm. It has 4 wires with 1m cable and 2.54mm pitch connector, each phase draws current 0.4A at 12V, with holding torque 26Ncm(36.82oz.in).

STEPPERONLINE NEMA 17 Stepper Motor 26Ncm(36.8oz.in) 12V 0.4A 3D Printer CNC

servo torque problem - Motors, Mechanics, Power and CNC - Arduino Forum